• Compressed Air
  • Optical Grade 100% Cotton Cleaning Cloth
  • Window Cleaner


  1. Before attempting to clean the mirror, use compressed air (i.e. Dust Off®), which can be found in most photographic or office supply stores, to make sure all dust and debris are off the mirror.
  2. Water Spots:
    Use an optical grade 100% cotton cleaning cloth (no lint) and a Window cleaner (i.e. Windex®). Apply Windex® to cloth until cloth is damp (saturated) but not dripping. Clean the mirror in one direction, then wipe using a fresh part of the cloth after each pass.
  3. Handle by holding along edges only. (When holding the mirror along the edge, do not press down on the mirror surface with your finger nails.) Do not put any weight or object on the mirror surface in any position.


Alvas Barres Floors Mirrors (“Alvas”) encourages customers to have all Alvas products professionally installed and maintained by an experienced and licensed contractor. Alvas provides installation and care/maintenance instructions for clients’ information and convenience only. Alvas cannot and does not make any representations, warranties or guarantees with respect to the installation, care or maintenance of Alvas products or any damage or defects resulting from the same. Improper installation, care or maintenance of any barre, floor, mirror, or other Alvas product may invalidate the product’s warranty or guarantee, if any. Alvas reserves the right to deny customer claims made pursuant to any such warranty or guarantee if Alvas determines the damage or defect to the product is the result of improper installation, care, maintenance or use of the product.