Alvas Wall Mount Fixed Bracket for Ballet Barres

You are here: :Home>Ballet Barres>Ballet Barre Mounting Options>Wall Mount Brackets for Ballet Barres>Alvas Wall Mount Fixed Bracket for Ballet Barres

Alvas Wall Mount Fixed Bracket for Ballet Barres

  FREE shipping to contiguous USA!


Alvas Wall Mount Fixed Brackets are mounted to the wall with a non-adjustable (fixed) height. Ideal for ballet for fitness use to create single or double barres.

Available in Black, White or Chrome. Custom finishes available upon request.

Length Conversion Calculator


Alvas Wall Mount Fixed Brackets are mounted to the wall with a non-adjustable (fixed) height. Ideal for ballet for fitness use to create single or double wood barres.

Fixed brackets (also known as non-adjustable brackets) are:

  • A staple for most dance studios
  • The most commonly used wall mounted ballet barre brackets in barre fitness studios
  • Also used for:
    • Physical therapy
    • Crunches/sit ups
    • Storing fitness stability balls off the floor- Saving valuable space
    • Many other multi-purpose uses

Available for purchase or rental. Contact us for rental price and availability.

Do you need a custom size or finish for our Wall Mount Fixed Ballet Barre Bracket? Contact us for a quote. A surcharge may apply.

Excellent Design

Each Wall Mount Fixed Ballet Barre Bracket is made of sturdy steel and will extend approximately 9″ from the wall. The ends of the brackets are threaded so they actually screw into the rear side of the barre. This excellent design allows your hand or foot to slide easily across the barre without interference from hitting the brackets.

Bracket Finish

Wall Mount Fixed Brackets are available in:

  • “Matte” Black
  • “Gloss” White
  • Shiny Chrome

Choosing the Correct Bracket Quantity

Please consult Alvas FAQ for bracket quantity and spacing per length of barre.
If purchasing Wall Mount Fixed Brackets, you may choose to double the quantity of brackets and barres to design double fixed barres instead of single barres.

Dance / Ballet

Traditional ballet uses barres for balance only. That being said, Alvas typically recommends:

  • 2 brackets for each barre up to 10′ long
  • 3 brackets for each barre up to 16′ long


Since barre fitness classes usually include some tugging on the barres, Alvas recommends:

  • 1 bracket for each 4′ length of barre
  • Adding additional bracket(s) for extra stability (Ensure the barre has more brackets than for standard/traditional ballet use
  • Consulting your local barre fitness studio for specific recommendations for their particular type of barre class

Other Purpose

Please consult your local contractor for their recommendation on your current project needs.

Completing Your Barre Unit

Pricing shown is for Wall Mount Fixed Brackets only and does not include barres.
(For use with Ballet Barres– Sold separately)

Made in USA

All of Alvas Wall Mount Fixed Brackets are manufactured in the United States.

Still Have Questions?

Click here for Answers to Frequently Asked Questions.
Have more questions? We have answers! Our experience is extensive and our advice is free. Click here to email us.


Weighs 1 lb
Click here for Wall Mount Fixed Bracket Specifications

Shipping Info

Lead Time

Production Time is usually 2 – 5 business days, plus transit time.
Transit time is determined by the shipping company, but may be affected by severe weather conditions.

Need it faster? Rush options

Need it faster? Call us and we’ll do our best to help! There is a chance we can rush your shipment and/or expedite the delivery service.
Expediting Options:
– Rush Production Time ($50 Rush charge may apply)
– Expedited Delivery Service
– Will Call (Customer Pick Up)

Shipping Cost

Shipping all Alvas manufactured products to anywhere in the contiguous USA is free! It’s just that simple.
Orders shipping outside the contiguous USA will have taxes and duties calculated at checkout.

Alvas also offers Will Call/Local Pickup options for the Southern California area.
Be sure to select “Will Call” as the shipping option when finalizing the order in the shopping cart.

Refer to our FAQ for more information on Shipping, Returns and Product Guarantees.


Mounting screws are included for Wood Stud installation. (If installing the Wall Mount Fixed Ballet Barre Brackets into something other than wood studs, screws or fasteners will need to be purchased from your local home improvement store)

Click here for Wall Mount Fixed Bracket Instructions

We also offer installation services to most Southern California locations.  Contact us for details.

Frequently Asked Questions

The diameter for Alvas wood ballet barres are 1-7/8”, + or – 1/8”. Wood will not be perfectly round.

Alvas ballet barres are hand-sanded smooth and ready to use.

Every square inch of our wood barres is inspected by hand. Splits, cracks and checks are cut out leaving beautiful straight grain lumber of the highest quality. Our barres are then sanded smooth and ready to use if the paint coating is not desired.

Adding a clear coat finish may be done, but is unnecessary. As the wood barre is used, the natural oils from hands cures the barre and give the barres a hand-rubbed look that is traditional and often preferred.

Our wood barres arrive ready to be stained, lacquered or painted, if desired. Some people paint a clear coat (or stain and then add a clear coat) on wood barres to achieve and maintain a look. If you choose to paint them, it should be done immediately after taking the barre out of the cardboard tube since the wood will be sanded and clean.

Traditionally, a ballet barre should be approximately waist height of the user.

However, the following statistics are very popular:

  • Single Barre Height*:    32” – 46” from floor (waist level)
  • Double Barre Height*:  32” – 34” lower barre; 44” – 46” from the floor for upper barre
  • Distance from Wall to Barre:
    • Inside = 7-1/4” (approx)
    • Outside = 9” (approx)

* “Barre height” is the distance (height) between the floor and the barre, or  more simply, how high your barre is off of the ground.

“Barre height” is the distance (height) between the floor and the barre, or  more simply, how high your barre is off of the ground.

With any of Alvas Wall Mount Ballet Barre Adjustable Brackets, Alvas Freestanding Ballet Barre Frames or Alvas Floor Mount Ballet Barre Frames, the height of your barre(s) can be adjusted – without uninstalling the Extension Units.

How to adjust the height of your ballet barre:

  1. Grab the Barre next to where the Extension shoulders touch the wood.
  2. Give the Barre an up and down wiggle, as needed, while loosening or tightening the Wingnut.
  3. Then slide the Extension up or down the Channel to your desired height, and re-tighten the Wingnut.

Pro Tip:

The Extension Units can also be made so they do not adjust by hand by replacing the Large Wingnut with a Hex Nut on the Extension. Alvas Hex Nuts are perfect if you prefer to not have barre heights adjustable since the barres can be made “fixed” with this simple hex nut. The barre height can still be adjustable at a later time of your preference, but will prevent the public (or children) from adjusting the barre height indiscriminately.

All Alvas Standard and Custom wood ballet barres with maintain a tight length tolerance of +/- 1/8″.

Perfect straightness is difficult to obtain in a natural product like wood.

Measuring ballet Barre Warp Tolerance diagram

Step 1: Sight down barre to determine apex of the warp.

Step 2: Center the 4’ level on the apex and secure the level to the barre (using tape, tie, etc) as shown in the diagram.

Step 3: Attempt to slide the 3/16” drill bit into the gap.

Step 4: If the drill bit slides freely and completely through the gap, then the barre is beyond our warp tolerance. Immediately call Alvas for return instructions.

Like most items that receive heavy use we recommend cleaning your ballet barres daily. You can clean them with an all-natural wood cleaner such as, Seventh Generation, Honest, or Method. Simply spray the cloth with the cleaning product and wipe down the barre the same way you would clean a table. If you prefer to use cleaning wipes that is okay too!

Don’t worry about drying out your barres. During use, the natural oils from hands will create a warm patina around the barre helping prevent the barres from drying out.

Customer satisfaction is important to us. One way we demonstrate this is by sending product samples to ones who are interested in seeing the product before purchasing it.

We also have a showroom in which our local customers may see our products in a larger scale. If you would like to visit our showroom, please contact us for an appointment.

Barre Wood Samples

Upon request, we will provide free ballet barre wood samples of Alvas Maple, Oak and Poplar wood. Contact us for more information. When contacting us, please provide the full mailing address, whose attention we should mail it to and which samples you would like.

Alvas Custom Ballet Barres are manufactured with the option of no holes or pre-drilled holes, spaced according to the customer’s specifications- Signed Diagram required. Pre-drilled holes are required to attach Alvas ballet barres to our wall mount brackets and floor mount stanchions.

Spacing Accuracy Tolerance
All Alvas wood barres: +/- 1/8″

Barre Length Tolerance
Alvas Custom wood barres: +/- 1/8″.

Barre LengthDiameterMax SpanMax OverhangMin Overhang
1' - 16'1 7/8", +/- 1/8"

The holes in Alvas Standard Barres are always separated by multiples of 16” to allow the mounting of every bracket directly into a wall stud- most wood wall studs are 16” apart. (If you are unsure of your stud spacing, we recommend using an electronic wood wall stud finder or consulting a contractor).

Holes are pre-drilled into the barres so that Alvas Fixed Brackets and Extensions* are ready for installation and actually screw into the rear side of the barre. This allows your hand or foot to slide across the barre without hitting the brackets.

* Extensions are used on Wall Mount Adjustable Brackets, Free Standing Frames and Floor Mount Stanchions.

Spacing Accuracy Tolerance
All Alvas wood barres: +/- 1/8″

Barre Length Tolerance
All Alvas wood barres will maintain a tight length tolerance of: +/- 1/8″.

Barre LengthBracket Number & Spacing
4’ Barre: 2 brackets spaced 32” apart (8” overhang)
6’ Barre: 2 brackets spaced 48” apart (12” overhang)
7’ 10'' Barre: 2 brackets spaced 64” apart (15” overhang)
10’ Barre: 2 brackets spaced 80” apart (20” overhang)
14’ Barre: 3 brackets spaced 64” apart (20” overhang)
16’ Barre: 3 brackets spaced 80” apart (16” overhang)

Alvas carries Maple, Oak and Poplar ballet barre wood.
Alternative types of wood may be special ordered with an additional set up fee.

Wood is a natural product so the grain and/or coloration of the wood can vary. Alvas cannot guarantee the grain color you receive.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Go to Top